Compliance with welfare facilities and Personal Protective Equipment (PPE) requirements on construction sites in Ghana

Oliver Tannor; Jacob Ofori-Darko; Tahiru Alhassan; Joseph Boadu

doi:10.36005/jplm.v2i2.27

Authors

Oliver Tannor Department of Real Estate and Land Management, Simon Diedong Dombo University of Business and Integrated Development Studies, Wa, Ghana
Jacob Ofori-Darko Department of Construction and Wood Technology Education, College of Technology Education, University of Education, Kumasi, Ghana
Tahiru Alhassan Sunyani Technical University, Sunyani, Ghana
Joseph Boadu School of Civil Engineering and Surveying, University of Portsmouth

DOI:

https://doi.org/10.36005/jplm.v2i2.27

Keywords:

Health, Safety, Management, Welfare facilities, PPEs, Construction

Abstract

The main aim of this study was to assess the level of compliance with health and safety management requirements on welfare facilities and Personal Protective Equipment by construction firms in Ghana. The study was conducted using a survey and participant field observation as the data collection approaches. The observation was done using an observation checklist developed from the welfare facilities and PPE requirements of the International Labour Organization on 35 construction sites selected across 7 regions of Ghana. The survey was conducted using a structured questionnaire with construction workers (n = 201). The results showed a high level of non-compliance with the provision of sanitary, accommodation, washing facilities, changing rooms and dining facilities. The results also showed that the only welfare facilities prioritised by construction firms were drinking water. Findings on compliance with the provision and use of PPEs showed that most construction firms failed to provide PPE for their workers. Also, the few firms who had them did not comply with the user directives. Therefore, construction firms must implement and enforce compliance with welfare facilities and PPE use. There is also the need for the development of a regulatory framework on occupational health and safety for the Ghanaian construction industry.

Downloads

Download data is not yet available.

Author Biographies

Oliver Tannor, Department of Real Estate and Land Management, Simon Diedong Dombo University of Business and Integrated Development Studies, Wa, Ghana

Tahiru Alhassan, Sunyani Technical University, Sunyani, Ghana

References

Arpit, P., Archana, G. & Heli, S. (2017). A study on labour welfare measures and social security on selected engineering unit of Ahmadabad. Journal of Management & Research, 6, 19-26. https://doi.org/10.17697/ibmrd/2017/v6i1/111654 DOI: https://doi.org/10.17697/ibmrd/2017/v6i1/111654

Agyekum, K., Ghansah, F. A., & Tetteh, P. A. (2021). The role of project managers (PMs) in construction health and safety implementation in Ghana. Journal of Engineering, Design and Technology, 19(1), 245–262. https://doi.org/10.1108/JEDT-04-2020-0122 DOI: https://doi.org/10.1108/JEDT-04-2020-0122

Alinaitwe, H. M., Mwakali, J. A., & Hansson, B. (2007). Factors affecting the productivity of building craftsmen‐studies of Uganda. Journal of Civil Engineering and Management, 13(3), 169-176. DOI: https://doi.org/10.3846/13923730.2007.9636434

Amoah, C., Bamfo-Agyei, E., & Simpeh, F. (2021). The COVID-19 pandemic: The woes of small construction firms in Ghana. Smart and Sustainable Built Environment, ahead-of-print(ahead–of–print). 2046-6099. https://doi.org/10.1108/SASBE-02-2021-0025 [Google Scholar] DOI: https://doi.org/10.1108/SASBE-02-2021-0025

Andolfo, C. & Sadeghpour, F. (2015). A probabilistic accident prediction model for construction sites. Procedia Engineering, 123, 15-23. DOI: https://doi.org/10.1016/j.proeng.2015.10.052

Annan, J. S., Addai, E. K. & Tulashie, S. K. (2015). A call for action to improve occupational health and safety in Ghana and a critical look at the existing legal requirement and legislation. Safety and health at work, 6(2), 146-150. DOI: https://doi.org/10.1016/j.shaw.2014.12.002

Boadu, E. F., Wang, C. C., & Sunindijo, R. Y. (2020). Characteristics of the construction industry in developing countries and its implications for health and safety: An exploratory study in Ghana. International journal of environmental research and public health, 17(11), 4110. DOI: https://doi.org/10.3390/ijerph17114110

Boniface, O. (2016). A safety culture development model for the SMEs in the building and construction industry. Journal of Emerging Trends in Economics and Management Sciences, 7(3), 106-115.

Cooney, P. J. (2016). Health and safety in the construction industry: A Review of procurement, monitoring, cost effectiveness and strategy, Manchester: University of Salford.

Crates, E. (2017). Health and safety in construction: A visual History. [Online] Available at: https://www.theb1m.com/video/health-and-safety-in-construction-a-visual-history [Accessed 10th April 2018]

Chellappa, V., Srivastava, V. & Salve, U.R. (2021). A systematic review of construction workers’ health and safety research in India. Journal of Engineering, Design and Technology, 19(6), 1488-1504. https://doi.org/10.1108/JEDT-08-2020-0345 DOI: https://doi.org/10.1108/JEDT-08-2020-0345

Chigara, B. & Moyo, T. (2022). Factors affecting the delivery of optimum health and safety on construction projects during the Covid-19 pandemic in Zimbabwe. Journal of Engineering, Design and Technology, 20(1), 24-46. https://doi.org/10.1108/JEDT-01-2021-0053 DOI: https://doi.org/10.1108/JEDT-01-2021-0053

Clarke, E. (2005). Do occupational health services really exist in Ghana? A special focus on the agricultural and informal sectors. Accra Ghana. Ghana Health Services, 8(2), 23-35.

Creswell, W. & Creswell, J. (2018). Research design: qualitative, quantitative, and mixed methods approaches. 5th ed. California: SAGE Publications Inc.

Construction Safety Partnership Advisory Committee (2016). Requirements for construction Site Welfare Facilities. https://csponline.ie/wp-content/uploads/2018/02/welfare_facilities_csp1.pdf

Dok-Yen, D.M., Nana Tabi, K. & Adinyira, E. (2018) Assessing the adequacy of welfare facilities on construction sites in Ghana. International Journal of Construction Engineering and Management, 7, 162-167.

Davies, V. and Tomasin, K. (2002). Construction safety handbook. 2nd Edition. London: Thomas Telford Publishing Ltd.

Durisko, J. (2018). The History of Safety in A Construction Environment. [Online]Available at: http://blog.vingapp.com/corporate/the-history-of-safety-in-a-construction-environment[Accessed 10th April 2018].

Emuze, F., Matete, R., & Smallwood, J. (2014). Exploring perceived implementation issues of the permit-to-work requirement of the construction regulations in South Africa. Journal of Construction, 9(2), 14-23

Gyamfi, T.A., Akorli, K.S., Osae, S. and Addy, E.N. (2021). Examining the impact of welfare facilities on building construction employee’s performance in the Eastern Region of Ghana. Journal of Building Construction and Planning Research, 9, 40-55. https://doi.org/10.4236/jbcpr.2021.91004 DOI: https://doi.org/10.4236/jbcpr.2021.91004

Geller, E. S. (2017). Working safe: How to help people actively care for health and safety. CRC Press. DOI: https://doi.org/10.1201/9781315273983

Hagan, D. E., Mustapha, Z., Akomah, B. B., & Aidoo, P. K. (2021). Occupational health and safety practices in Cape Coast Metropolis. Baltic Journal of Real Estate Economics and Construction Management, 9671, 112–121. DOI: https://doi.org/10.2478/bjreecm-2021-0009

Haslam, R. A., Hide, S. A., Gibb, A. G., Gyi, D. E., Pavitt, T., Atkinson, S., & Duff, A. R. (2005). Contributing factors in construction accidents. Applied Ergonomics, 36(4), 401-415. DOI: https://doi.org/10.1016/j.apergo.2004.12.002

Hemamalinie, A., Jeyaarthi, A. J., & Ramajeyam, L. (2014). Behavioural based safety culture in the construction industry. International Journal of Emerging Technology and Advanced Engineering, 4(4), 45-50.

Health and Safety Executive (2010) Provision of Welfare Facilities during Construction Work, Construction Information Sheet 59. http://www.hse.gov.uk/pubns/cis62.pdf

Health and Safety Executive. European Comparison; Summary of UK Performance; Health and Safety Executives: Bootle, UK, 2017

Health and Safety Executive (2017). Fatal injuries arising from accidents at work in Great Britain, London: Health and Safety Executive.

Health and Safety Executive (2015). Construction (Design and Management) Regulations. The Stationary Office Limited, London.

Hughes P. and Ferrett E. (2008) Introduction to Health and Safety in Construction. 3rd ed. Oxford: Butterworth-Heinemann DOI: https://doi.org/10.4324/9780080888040

International Labour Organization (1999). Safety, Health and Welfare on Construction Sites: A Training Manual. 2nd ed. Geneva: ILO.

Jebb, S. (2015). Reducing workplace safety incidents: Bridging the gap between safety culture theory and practice, 1st Ed., Centre for Accident Research and Road Safety, New Zealand.

Johnston, K. & Loader, K. (2003), "Encouraging SME participation in training: identifying practical approaches", Journal of European Industrial Training, 27 (6), 273-280. https://doi.org/10.1108/03090590310479901. DOI: https://doi.org/10.1108/03090590310479901

Kheni, N., Dainty, R, J, Andy. & Gibb, A. (2008). Health and safety management in developing countries: A study of construction SMEs In Ghana. Construction Management and Economics, 26(11), 1159-1169, DOI: 10.1080/01446190802459916 DOI: https://doi.org/10.1080/01446190802459916

Kadiri, Z. O., Nden, T., Avre, G. K., Oladipo, T. O., Edom, A., Samuel, P. O. & Ananso, G. N. (2014). Causes and effects of accidents on construction sites (a case study of some selected construction firms in Abuja FCT Nigeria). IOSR Journal of Mechanical and Civil Engineering, 11(5), 66-72. DOI: https://doi.org/10.9790/1684-11516672

Kheni, N. A. & Braimah, C. (2014). Institutional and regulatory frameworks for health and safety administration: Study of the construction industry of Ghana. International Refereed Journal of Engineering and Science (IRJES), 3(2), 24–34.

Kheni, N. A., Dainty, A. R. J. & Gibb, A. G. F. (2007). Influence of political and socio-cultural environments on health and safety management within SMEs: A Ghana case Study. In: D. Boyd (Ed.), Procs 23rd Annual Association of Researchers in Construction Management Conference (159–168).

Kossivi, B., Xu, M. & Kalgora, B. (2016). Study on determining factors of employee retention. Open Journal of Social Sciences, 4, 261-268. http://dx.doi.org/10.4236/jss.2016.45029 DOI: https://doi.org/10.4236/jss.2016.45029

Laryea, S. & Mensah, S. (2010). Health and safety on construction sites in Ghana, London: RICS.

Mariam, A.T., Olalusi, O.B. & Haupt, T.C. (2021). A scientometric review and meta-analysis of the health and safety of women in construction: structure and research trends. Journal of Engineering, Design and Technology, 19(2), 446-466. https://doi.org/10.1108/JEDT-07-2020-0291 DOI: https://doi.org/10.1108/JEDT-07-2020-0291

Mustapha, Z. (2016). Revised health and safety compliance model for the Ghanaian construction industry. International Journal of Engineering, Science and Technology, 8(2), 46–51. DOI: https://doi.org/10.4314/ijest.v8i2.4

Mustapha, Z., Aigbavboa, C., Thwala, W. (2018). Examination of Occupational Health and Safety Practices in Ghana. In: Arezes, P. (eds) Advances in Safety Management and Human Factors. AHFE 2017. Advances in Intelligent Systems and Computing, 604. Springer, Cham. https://doi.org/10.1007/978-3-319-60525-8_42 DOI: https://doi.org/10.1007/978-3-319-60525-8_42

Maxwell, A., Lebbaeus, A., Joana, A., & Agyemang, C. B. (2015). Occupational safety and health issues in Ghana: strategies for improving employee safety and health at workplace. International Journal of Business and Management Review, 3(9), 60–79.

Nuwayhid, I. A. (2004). Occupational health research in developing countries: a partner for social justice. American Journal of Public Health, 94(11), 1916-1921. DOI: https://doi.org/10.2105/AJPH.94.11.1916

Orji Solomon, E., Enebe Eucharia, C., & Onoh Felix, E. (2016). Accidents in building construction sites in Nigeria: A case of Enugu state. International Journal of Innovative Research and Development, 5(4), 244-248.

OSHA (2016). Recommended Practices for Safety and Health Practices in Construction: Occupational Health and Safety Administration

Osei-Asibey, D., Ayarkwa, J., Adinyira, E., Acheampong, A. & Amoah, P. (2021). Roles and responsibilities of Stakeholders towards ensuring health and safety at construction site. Journal of Building Construction and Planning Research, 9, 90-114. doi: 10.4236/jbcpr.2021.91008. DOI: https://doi.org/10.4236/jbcpr.2021.91008

Puplampu, B. B., & Quartey, S. H. (2012). Key issues on occupational health and safety practices in Ghana: A review. International journal of business and social science, 3(19), 151-156.

Reese, D. & Eidson, J. V. (2006). Handbook of OHSA Construction Safety and Health. 2nd Ed. s.l.: CRC Press. DOI: https://doi.org/10.1201/9781420006230

Saunders, M., Lewis, P., & Thornhill, A. (2009). Research methods for business Students (5th Ed.). Essex, UK: Pearson Education Limited.

Scipioni, A., Arena, F., Villa, M. & Saccarola, G. (2001). Integration of management systems. Environmental Management and Health, 12(2), 136-140. DOI: https://doi.org/10.1108/09566160110389906

Secretary of State (2015). Construction Design Management Regulations, London: Secretary of State, UK.

Spillane, P., Noonan, M., Oyedele, O., Meding, J., & Konanahalli, A. (2013). Meeting the requirements of the CDM regulations: Identification of critical success factors of small to medium sized contractor’s compliance in the UK Construction Industry. RICS.

Summerhayes, S. D. (2016). CDM Regulations 2015 Procedures Manual, Fourth Edition. John Wiley & Sons, Ltd. DOI: https://doi.org/10.1002/9781119243076

Suresh, G. & Vijayarani, K. (2015). Intra-mural and extra-mural welfare facilities. International Journal of World Research, 1, 94-104.

Soltanzadeh, A., Mohammadfam, I., Moghimbeigi, A., & Akbarzadeh, M. (2016). Analysis of occupational accidents induced human injuries: a case study in construction industries and sites. Journal of Civil Engineering and Construction Technology, 7(1), 1-7. https://doi.org/10.5897/JCECT2015.0379 DOI: https://doi.org/10.5897/JCECT2015.0379

Tetteh, S. N. (2003). Occupational health and safety policy and legislation in Ghana - Stakeholders' workshop report, in African Newsletter on Occupational Health and Safety, 19-21.

United State Department of Labour (2017). Occupational Safety and Health Administration [Online] Available at: https://www.osha.gov/dcsp/products/topics/businesscase/costs.html [Accessed 13th April 2018].

Williams, J., Fugar, F., & Adinyira, E. (2020). Assessment of health and safety culture maturity in the construction industry in developing economies: A case of Ghanaian construction industry. Journal of Engineering, Design and Technology, 18(4), 865–881. https://doi.org/10.1108/JEDT-06-2019-0151 DOI: https://doi.org/10.1108/JEDT-06-2019-0151

Weekes, J. (2017). Health and Safety Bulletin. [Online]Available at: https://www.healthandsafetyhandbook.com.au/6-elements-of-an-effective-safety-management-system/ [Accessed 17th April 2019].